Disrupter Pro

Disrupter

T Series

x16 hunting bow at gearhead archery

T Carbon Series

B Series

x16 hunting bow at gearhead archery

P Series (Pivot)

gearhead P30 hunting bow

T-15 Series

X-16 Series

x16 hunting bow at gearhead archery

Pick a Grip

Stabilizers

Releases

x16 hunting bow at gearhead archery

Sliders

x16 hunting bow at gearhead archery

String Sets

Hats

Tops

x16 hunting bow at gearhead archery

Brand Merch

x16 hunting bow at gearhead archery

Packs

Shop All Products

ST-2 Stabilizer

$25.00

Gearhead Archery offers more options for adding weight and stability to your bow than any other bow manufacturers.

The ST-2 frontal mount is positioned between the two riser plates beneath the grip. It is attached through the extra threaded holes that are needed when converting the bow from right to left-handed or vice versa. This mount is more conventional and has stabilizer positions of dead center, left of center and right of center. It can also be used in the rear of the riser to attach back bar stabilizers.

With Gearhead Archery, anything is possible.

Product Description

Steps to install the ST-2 to your Gearhead

Because all of the Gearhead bows can be converted from right hand to left hand or vice-versa we have sight location threads in all quadrants. We use these lower threaded locations to attach the ST-2 Stabilizer mount.

  1. Slide the ST-2 mount in-between the two riser side plates and line it up with the threaded hole locations.
  2. Use the provided 6-32 button head cap screws to attach the ST-2 to your bow
  3. Go through the riser plates and thread the cap screws into the ST-2 bracket and tighten snug.
  4. Install your stabilizer to the desired location.

Additional information

Weight .14 lbs
Dimensions 8 × 6 × 6 in